Out of stock
Out of stock
Minimum purchase quantity
The minimum purchase quantity is not reached

 

FOR THE BOAT

Half-wood duckboards

Glues, joints, cleaning products

Contact

Newsletter and sales promotion

Sign up...

Professionnal

 

Awlgrip Hullgard extra epoxy primer A+B 1.7 ltr

For steel and aluminium application

Ref. GRA3919
Awlgrip Hullgard extra epoxy primer A+B 1.7 ltr

non-contractual photo

New (10.89 / Square Meter) 70.79 Not including tax 84.95 Including tax

In stock Quantity in stock: 1

quantity

Back in stock notification
Receive an alert by email when your choice is in stock
Your e-mail*:

Send this page to a friend

Product Details

 

Features
Specification data
Application instructions

HULLGARD EXTRA Primer is a two component epoxy substrate primer with excellent anticorrosive properties. It offers excellent aged recoatability and provides a perfect base for subsequent fairing with TDS Epoxy glue FFE 200 compound(s).

Type: Two component epoxy


Color: White


Packaging:
All countries: Available in 1 Gallon base (0.87GL fill volume) and 1 Quart converter (16.7 fl.oz fill volume).
Mixed volume is 1 Gallon.
EU only: Available in 5 Gallon base (16.45lt fill volume) and 84fl.oz converter (2.46lt fill volume). Mixed volume is 5
Gallon. Also available in 1 Quart Kit pack where mixed volume is 1 Quart.


Theoretical Coverage - 185 Sq. feet/gallon = 4.6m2 / litre at 4 mils/ 100 microns DFT. Coverage calculations are based on theoretical transfer efficiency of 100%. Actual coverage rate obtained will vary according to equipment choice, application techniques, part size, and application environment.


Recommended W et Film Thickness: 9 mils (220 microns) per coat by airless spray, 5 mils (130 microns) per coat by brush/roller
Recommended Dry Film Thickness: 4 mils (100 microns) per coat by airless spray, 2.5 mils (60 microns) per coat by brush/roller
Number of coats: 1 by airless spray (at 4 mils/100 microns DFT).


Anticipated Drying Time at 77°F/50% R.H: 30 minutes dust-free, 6 hours touch dry; 10 hours hard dry.


Recoatability (At 77°F/25°C, 50% RH):
W ith Itself or: 2 hours (minimum)
Primers/surfacers Maximum recoat time, without sanding 6 months (in shed). Inspection for cleanliness is recommended.
With Fillers: 16 hours (minimum)
Maximum recoat time, without sanding 6 months (in shed). Inspection for cleanliness is recommended
VOC: Base (D6120) – 482 g/lt or 4.0 lbs/gallon
Converter (D3730) – 376 g/lt or 3.1 lbs/gallon
Mixed components, unreduced (as supplied) VOC is 468 g/lt or 3.9 lbs/gallon

Surface Preparation
Hullgard Extra may be directly applied to grit blasted steel in accordance with SSPC-SP5-85 to a 3-4 mil profile (or Sa2 ½ outside of the US). Alternatively power grind with a 16 to 36 grit disc to obtain profile. May also be applied to abraded aluminum (36 grit disc) and fiberglass (degrease and abrade using 180 grit paper). For the ultimate anticorrosive system first apply a coat of Max Cor CF to the suitably prepared steel or aluminium substrate (refer to Max Cor CF datasheet for further information on surface preparation and overcoating times). W ood should be clean and sanded with 80 –180 grit paper.

 

Mixing and Reduction
Check for settling, then thoroughly mix the base until a consistent homogenous blend is obtained. Power mixers or shakers are preferred. If not available thorough hand mixing is acceptable. Add converter and thoroughly mix again. Mix ratio by volume is 10 parts D6120 to 1.5 parts D3730. Reduction is not normally required but at lower temperatures small amounts (5%) of T0006 can be added. Do not reduce more than 15%.

Induction time 10 minutes.
Anticipated Pot Life at 25°C/ 77°F, 50% RH: 8 hours

 

Application Instructions
Apply by airless spray, air atomized spray, brush or roller. Apply 9 mils (220 microns) W FT yielding 4 mils (100 microns) DFT per coat. Multiple coats may be required when using roller or brush.

 

Warning:
Do not apply paint materials to surfaces less than 3°C (5° F) above dew point, or to surfaces warmer than 41°C (105°F). Ambient temperature should be minimum 13°C (55°F) an d maximum 41°C (105°F). The information in this Product Data Sheet is not intended to be exhaustive. Any person using the product without first making further enquiries as to the suitability of the product for the intended purpose does so at their own risk and, to the extent permitted by law, we can accept no responsibility for the performance of the product or for any loss or damage arising out of such use. The information contained in this Product Data Sheet is liable to modification from time to time in the light of experience and our policy of continuous product development.

 

Tools

interligne
interligne
Flexible silicone, grout & sealant smoother Flexible silicone, grout & sealant smoother 145mm Brand

(2.98 /Unit)

2.98 Including tax
In stockQuantity in stock: 53  
Burmese teak deck plugs 8mm Burmese teak deck plugs 8mm Sold by 10 pcs Brand

(3.24 /kit)

3.24 Including tax
In stockQuantity in stock: 8  
interligne
Combination spreader 130x90x10mm Combination spreader 130x90x10mm For epoxy/glue Brand

(3.38 /Unit)

3.38 Including tax
In stockQuantity in stock: 24  
Joint smoothing kit Joint smoothing kit 5 pce Brand

(6.30 /Unit)

6.30 Including tax
In stockQuantity in stock: 35  
interligne
Bag of 10 nozzles for air gun Bag of 10 nozzles for air gun For 600ml sausages Brand

(0.70 /Unit)

6.97 Including tax
In stockQuantity in stock: 19  
Burmese teak deck plugs 15mm Burmese teak deck plugs 15mm Sold by 10 pcs Brand

(7.13 /kit)

7.13 Including tax
In stockQuantity in stock: 17  
interligne
10 adhesive pads refill 10 adhesive pads refill For TDS seam-sander Brand

(7.46 /Unit)

7.46 Including tax
In stockQuantity in stock: 29  
Mixing paddle for glue and paint Mixing paddle for glue and paint Mixing paddle zinc plated Brand

(8.99 /Unit)

8.99 Including tax
In stockQuantity in stock: 20  
interligne
Burmese teak deck plugs 8x8mm (sold by 100) Burmese teak deck plugs 8x8mm (sold by 100) Sold by 100 pcs Brand

(0.10 /Unit)

9.56 Including tax
In stockQuantity in stock: 635  
Burmese teak deck plugs 10x10mm Burmese teak deck plugs 10x10mm Sold by 100 pcs Brand

(0.10 /Unit)

10.30 Including tax
In stockQuantity in stock: 566  
interligne
Auto-adhesive bond breaker 5mmx2mm Auto-adhesive bond breaker 5mmx2mm Sold by 5 rolls Brand

(12.83 /Unit)

12.83 Including tax
In stockQuantity in stock: 147  
interligne
Burmese teak deck plugs 15x15mm Burmese teak deck plugs 15x15mm Sold by 100 pcs Brand

(0.18 /Unit)

17.88 Including tax
In stockQuantity in stock: 32  
Foldables hinges 76x38x2mm Foldables hinges 76x38x2mm Sold by two Brand

(18.36 /Unit)

18.36 Including tax
In stockQuantity in stock: 12  
interligne
Caulk gun for 600ml sausages Caulk gun for 600ml sausages Sold with its nozzle Brand

(21.65 /Unit)

21.65 Including tax
In stockQuantity in stock: 11  
Teak finger rings 4x4x1.8cm Teak finger rings 4x4x1.8cm Sold by 10pcs/set Brand

(22.68 /Unit)

22.68 Including tax
In stockQuantity in stock: 67  
interligne interligne
Bracket 303x165mm Bracket 303x165mm Polished stainless steel Brand

(31.97 /Unit)

31.97 Including tax
In stockQuantity in stock: 15  
interligne interligne
Space and bending block Fixe Deck Space and bending block Fixe Deck Sold by 100 pcs Brand

(34.20 /Unit)

34.20 Including tax
In stockQuantity in stock: 73  
Space and bending block Fixe Deck Space and bending block Fixe Deck Sold by 100 pcs Brand

(35.10 /Unit)

35.10 Including tax
In stockQuantity in stock: 51  
interligne
TDS Reefing hook TDS Reefing hook Brand

(35.71 /Unit)

35.71 Including tax
In stockQuantity in stock: 33  
interligne interligne interligne
Air caulk gun Air caulk gun For sausages up to 600ml Brand

(155.27 /Unit)

155.27 Including tax
In stockQuantity in stock: 4  
interligne